http://www.e-techgarage.com/Puck/2009/12/01/design-meeting-one-building-a-circuit-to-control-the-motors/ Embedded Geek Wed, 17 Feb 2010 01:53:45 +0000 http://wordpress.org/?v=2.9.2 hourly 1 http://www.e-techgarage.com/Puck/2009/12/01/design-meeting-one-building-a-circuit-to-control-the-motors/comment-page-1/#comment-13 e-techgarage.com » Calibrated Motion Wed, 09 Dec 2009 23:57:42 +0000 http://www.e-techgarage.com/Puck/?p=28#comment-13 [...] moving after stopping the pulses driving the H-bridges.  Even though the state table of the H-bridges have a “Brake” state, it does not work with our [...] [...] moving after stopping the pulses driving the H-bridges.  Even though the state table of the H-bridges have a “Brake” state, it does not work with our [...]

]]> http://www.e-techgarage.com/Puck/2009/12/01/design-meeting-one-building-a-circuit-to-control-the-motors/comment-page-1/#comment-5 e-techgarage.com » Motor Controller Circuit Thu, 03 Dec 2009 19:21:01 +0000 http://www.e-techgarage.com/Puck/?p=28#comment-5 [...] indicated on Puck’s blog we have been talking about a controller board to drive the four motors on the Rover.  The original [...] [...] indicated on Puck’s blog we have been talking about a controller board to drive the four motors on the Rover.  The original [...]

]]> http://www.e-techgarage.com/Puck/2009/12/01/design-meeting-one-building-a-circuit-to-control-the-motors/comment-page-1/#comment-2 Rover – Assembling the Chassis | Puck's Workbench Tue, 01 Dec 2009 18:57:08 +0000 http://www.e-techgarage.com/Puck/?p=28#comment-2 [...] Hook up the control lines to each motor (See my H-Bridge article) [...] [...] Hook up the control lines to each motor (See my H-Bridge article) [...]

]]>